Showing 561–576 of 2974 results
Sort:
- Model: C1300-24P-4G
- Downlink Ports: 24 × 10/100/1000 Mbps RJ-45 (PoE+)
- Uplink Ports: 4 × 1 Gb SFP slots
- Switching Capacity: ~56.0 Gbps
- Forwarding Rate: ~41.66 million packets per second (Mpps) at 64-byte packets
- PoE Power Budget: 195 W for the PoE+ port set
- Management Interfaces & Features: Web UI, CLI, SNMP v1/v2/v3, Cisco Business Dashboard, stacking capability up to 8 units
- Advanced Security: IEEE 802.1X, DHCP snooping, dynamic ARP inspection, IPv6 first-hop security, IP source guard
- Deployment Form: Rack-mountable (19-inch) 1 RU bracket included for 24/48-port models
- Warranty: Limited lifetime hardware warranty with return-to-factory replacement (region dependent)
- Model: C1300-48P-4G
- Ports: 48 × 10/100/1000 Mbps RJ-45 (PoE+) plus 4 × 1 Gb SFP uplinks.
- Switching Capacity: ~104 Gb/s
- Forwarding Rate: ~77.38 Mpps (64-byte packets)
- PoE Power Budget: ~370 W
- PoE Standard: IEEE 802.3af/at (PoE+) per port (up to ~30 W per port within budget)
- Dimensions: ~445 × 350 × 44 mm (17.5″ × 13.8″ × 1.73″)
- Weight: ~5.43 kg (≈11.97 lb) for this model variant.
- Warranty: Limited lifetime hardware warranty (region-dependent) and Return-to-Factory replacement
- Model: Cisco Catalyst WS-C2960X-24PS-L
- Ports: 24 x Gigabit Ethernet with PoE+
- Uplink Ports: 4 x 1G SFP uplink slots
- Switching Capacity: 216 Gbps
- Forwarding Rate: 107.1 Mpps
- PoE Budget: 370W total
- Flash Memory: 128 MB
- DRAM: 512 MB
- Stackable: Yes, up to 8 switches via FlexStack-Plus
- Dimensions: 1.75 x 17.5 x 15.2 inches (H x W x D)
- Weight: 15.4 lbs (approx.)
- Power Supply: Internal, fixed
- Operating System: Cisco IOS
- 16 × 10/100/1000 Mbps Gigabit Ethernet ports
- Switching capacity: 32 Gbps
- MAC address table: 8,000 entries
- QoS traffic prioritization
- Loop detection and cable diagnostics
- Compact, desktop or wall-mount design
- Energy-efficient operation with smart power-saving features
- External AC power adapter (non-PoE)
- Model: CBS110-24T (also seen as CBS110-24T-NA / -EU)
- Ports: 24 × 10/100/1000 Mbps RJ-45 + 2 × 1 Gb SFP (combo with RJ-45)
- Switching capacity: 48 Gb/s
- Forwarding rate: 35.7 Mpps (64-byte packets)
- MAC address table size: 8K entries
- Jumbo frame support: 9,216 bytes
- Power input: 100-240 V AC, 50/60 Hz (internal universal power supply)
- Power consumption (max): ~16-18 W, typical for non-PoE version
- Operating temperature: 0 °C to 40 °C
- Dimensions: 279 × 170 × 44 mm (≈ 11″ × 6.7″ × 1.73″)
- Weight: ~1.45 kg forthe non-PoE model
- Warranty: Limited lifetime hardware warranty (check region for details)
- 8 × 10/100/1000 Mbps Gigabit Ethernet ports
- Switching capacity: 16 Gbps
- MAC address table: up to 8,000 entries
- Quality of Service (QoS) traffic prioritization
- Loop detection and cable diagnostics
- Plug-and-play unmanaged switch
- Energy-efficient operation (cable length and link status detection)
- Powered via AC adapter (non-PoE)
Cisco CBS350-24P-4G 24-port PoE+ Gigabit Ethernet Managed Switch with 4 Gigabit SFP Ports
KSh 120,000.00- 24 × 10/100/1000 Mbps Gigabit Ethernet PoE+ ports
- 4 × Gigabit SFP combo uplink ports
- Switching capacity: 56 Gbps
- Forwarding rate: 41.66 Mpps
- Packet buffer: 1.5 MB
- MAC address table: dynamic learning
- IPv4/IPv6 static routes: up to 990
- IP interfaces: up to 128
- DHCP server and relay support
- RIP v2 and CIDR support
- QoS with 8 hardware queues (WRR, strict priority)
- PoE Standards: IEEE 802.3af / IEEE 802.3at (PoE+)
- Total PoE Power Budget: ~67 W
- Switching Capacity (Backplane): ~20 Gbps
- Forwarding Rate: ~14.88 Mpps (64-byte packets)
- MAC Address Table Size: ~16K entries
- VLAN Support: Up to ~4,094 VLANs
- Management Interfaces: Web UI, CLI, SNMP v1/v2c/v3, SSH, RADIUS/TACACS+
- Physical Dimensions: ~268 × 185 × 44 mm (W×D×H)
- Operating Temperature: 0 °C to ~50 °C (typical)
- Mounting: Desktop, wall-mountable, optional rack-kit support
- Supported call control protocols: SCCP and SIP (with Cisco Unified CallManager)
- Power: IEEE 802.3af PoE (Class 2) or Cisco inline power; 48 V DC optional AC adapter (CP-PWR-CUBE-3=) for local powering.
- Display: 320 × 222 pixels, 4-bit grayscale.
- Dimensions (H × W × D): 8.2″ × 10.5″ × 6″ (20.32 cm × 26.67 cm × 15.24 cm)
- Weight: ~3.5 lb (1.6 kg)
- Audio codecs supported: G.711 (a/µ), G.729a, G.729ab, G.722 (wideband), iLBC
- Security: Secure boot, X.509v3 certificates for integrity, 802.1X support, AES-128 media encryption (when configured)
- Module type: SFP (Small Form-factor Pluggable)
- Standard: IEEE 802.3z 1000BASE-LX/LH
- Wavelength: 1310 nm nominal
- Connector: LC duplex female (optical)
- Media types supported: Single-mode fibre (9/125 µm) up to ~10 km; Multimode fibre (50/125 µm or 62.5/125 µm) up to ~550 m (depending on fibre type and condition)
- Digital Optical Monitoring (DOM): Supported (for extended versions)
- Operating temperature: Standard commercial (0 °C to ~70 °C) and extended/industrial variants available (-5 °C to 85 °C or -40 °C to 85 °C) depending on SKU.
- Form factor: SFP (Small Form-factor Pluggable)
- Standard: IEEE 802.3z 1000BASE-SX
- Wavelength: 850 nm nominal
- Fibre type: Multimode fibre (MMF)
- Connector: LC duplex (dual LC/PC)
- Power supply: +3.3V typical (SFP standard)
- Operating temperature: Standard 0 °C to 70 °C; extended/industrial variants (-40 °C to +85 °C) may exist.
- Form factor: SFP (Small Form-factor Pluggable)
- Interface: RJ-45 copper connector, 1000BASE-T (Gigabit over UTP)
- Supported cable: Category 5e or better, length up to ≈100 m (328 ft) over copper UTP.
- Speed: 10 / 100 / 1000 Mbps (auto-negotiation)
- Auto MDI/MDIX: Supported for simplified connectivity.
- Power consumption: Typical low-power design (approx. ≤1 W for copper SFP modules)
- Operating temperature (depending on version): Standard commercial range; some variants support extended/industrial temperatures (-40 °C to +85 °C) for harsh environments.
- Standards compliance: IEEE 802.3, IEEE 802.3ab (1000BASE-T)
- Screen: 396 × 162 pixels (3.5″)
- Ethernet: Dual 10/100/1000 Mbps ports
- Programmable line keys: 4
- PoE Class: Class 1 (IEEE 802.3af)
- Voice codecs: G.711 (a/µ), G.722 (wideband), G.722.2, G.729ab, iLBC, OPUS
- Display type: Backlit greyscale monochrome
- Headset support: RJ-9 analog headset jack (wideband capable)
- Wall-mountable: Yes (optional wall-mount kit)
- Compatibility: SIP, wide enterprise calling features (call-hold, transfer, conference, directory, voicemail, speed-dial)
- Default Memory: 4 GB DRAM, upgradable to 16 GB
- Default Flash: 4 GB, up to 16 GB
- Form Factor / Dimensions: 1 RU; approx. 44.45 mm H × 438.15 mm W × 438.15 mm D
- Power Supply Options: Internal AC (with a DC variant SKU available)
- Lifecycle Status: End-of-Sale announced (Nov 07 2023) and End-of-Support expected Nov 30 2028.
Cisco SFP-10G-ER Compatible SFP+ 10GBASE-ER 1550nm 40km DOM Duplex LC/UPC SMF Optical Transceiver Module
KSh 38,500.00- Data rate: Up to 10 Gbps (10GBase‑ER standard)
- Wavelength: 1550 nm nominal
- Media type: Single‑mode fibre (SMF, G.652)
- Maximum reach: ~40 km on standard SMF (G.652)
- Connector type: LC duplex (UPC)
- Form factor: SFP+ (Small Form‑factor Pluggable Plus)
- Monitoring: Digital optical monitoring (DOM) supported
- Form factor: SFP+ (Small Form-factor Pluggable)
- Standard compliance: IEEE 802.3ae / 10GBASE-LR
- Wavelength: 1310 nm nominal
- Connector type: LC duplex
- Maximum reach: ~10 km on single-mode fiber (SMF, 9/125 µm)
- Data rate: 10 Gbps (supports full 10GBase-LR speeds)
- Power supply: 3.3 V typical (per SFP+ standard)
- Operating temperature (standard): 0 °C to 70 °C (commercial)