Showing 1937–1952 of 2974 results
Sort:
- Model Number: CRS112-8G-4S-IN
- CPU: QCA8511, 400 MHz
- RAM: 128 MB
- Ethernet Ports: 8 x Gigabit Ethernet
- SFP Ports: 4 x SFP cages (supports 1.25G modules)
- Power Input: 10–57V passive PoE or 12V adapter (included)
- Power Consumption: Maximum 13W
- Operating System: RouterOS (Level 5 license) or SwOS
- Dimensions: 200 x 143 x 44 mm
- Product code: CRS317‑1G‑16S+RM
- CPU: Dual‑core ARM 98DX8216, 800 MHz
- RAM: 1 GB
- Storage: 16 MB flash
- Operating systems: RouterOS (level 6) or SwitchOS
- Switch chip: 98DX8216
- Ports: 16 × SFP+ (supports 1.25 Gb and 10 Gb modules) / 1 × 10/100/1000 Mb RJ‑45 / 1 × RJ‑45 serial console
- Power: Dual AC inputs (100–240 V, 50–60 Hz) / Max consumption ~44 W
- Cooling: Passive chassis with two temperature‑controlled fans
- Dimensions: 443 × 224 × 44 mm (1U rackmount)
- Product code: L009UiGS‑2HaxD‑IN
- CPU: dual‑core IPQ‑5018 ARM @ 800 MHz
- RAM: 512 MB
- Storage: 128 MB NAND
- Switch chip: Marvell 88E6190 (2.5 Gbps backplane)
- Ethernet ports: 8 × RJ45 10/100/1000 Mbps
- SFP slot: 1 × up to 2.5 Gbps
- Wi‑Fi: 2.4 GHz, 802.11b/g/n/ax, 2×2 MIMO, max 574 Mbps, 4 dBi antenna gain
- PoE‑in: Ether1, 802.3af/at, 24–56 V support
- PoE‑out: Ether8, passive (1 A at 18–30 V or 450 mA at 30–57 V), total 1 A
- USB: 1 × USB 3.0 Type‑A, max 1.5 A output, with reset capability
- Console: RJ45 serial port
- Power inputs: DC jack (24–56 V) and PoE‑in
- Power consumption: ~14 W idle, up to 47 W max
- CPU: Annapurna Labs Alpine AL21400, Quad-Core ARM Cortex-A15, 1.4 GHz
- RAM: 1 GB DDR3
- Storage: 60 GB M.2 SSD (Pre-Installed)
- Ethernet Ports: 13x Gigabit Ethernet (10/100/1000 Mbps)
- Serial Port: RJ45 Console
- USB Port: 1x USB 3.0 (Type A)
- Switch Chip: Hardware VLAN & Bridging Support
- Power Supply: Dual Redundant with Auto Failover
- PoE Input: Supported on Port 13 (18–57 V)
- CPU: Dual-core 1.4 GHz
- RAM: 1 GB
- Storage: 512 MB NAND
- Ethernet Ports: 5x 10/100/1000 Mbps, 5x SFP cages
- USB Port: 1x USB 2.0
- Power Input: 100-240V AC, 50-60 Hz
- Power Consumption: 20W max
- Dimensions: 44 x 220 x 178 mm (1U rackmount)
- Operating System: MikroTik RouterOS
- Supported Protocols: IPv4, IPv6, OSPF, BGP, MPLS, VPN
MikroTik RB4011iGS+RM is a high-performance, rack-mountable router designed for small to mid-sized businesses, ISPs, and advanced home labs. Powered by a quad-core 1.4 GHz Cortex-A15 CPU and 1 GB of RAM, it offers ten Gigabit Ethernet ports and a 10 Gbps SFP+ uplink, providing scalable and future-proof networking.
The router supports hardware-accelerated IPsec for VPNs and firewall tasks, passive PoE input/output, and features a fanless metal chassis for silent, reliable operation. With RouterOS v7, advanced routing features, and health monitoring, it’s perfect for professional network management in dense environments.
Add to cart
- CPU: Quad-core ARM Cortex-A72 1.4GHz
- RAM: 1GB DDR4
- Storage: 128MB NAND + microSD slot
- Ethernet Ports: 1x 2.5GbE, 8x 1GbE
- SFP+ Cage: 1x 10Gbps SFP+
- USB Port: 1x USB 3.0
- Power Input: 18-57V DC (PoE in supported)
- Power Consumption: 15W max
- Dimensions: 134 x 120 x 35mm
- Operating System: MikroTik RouterOS
- Model Number: RB760iGS (hEX S)
- CPU: Dual-core MediaTek MT7621A, 880 MHz
- RAM: 256 MB
- Ethernet Ports: 5x 10/100/1000 Gigabit Ethernet
- SFP Port: 1x SFP (supports 1.25Gbps modules)
- PoE Output: Passive PoE on port 5 (up to 57V, 500mA)
- USB Port: 1x USB 2.0 for external storage or LTE modems
- Power Input: 12-57V passive PoE or included 24V adapter
- Power Consumption: Max 24W
- Operating System: RouterOS Level 4
- Model Number: RB941-2nD-TC (hAP Lite)
- CPU: 650 MHz single-core processor
- RAM: 32 MB
- Ethernet Ports: 4x 10/100 Fast Ethernet
- Wireless Standards: 802.11b/g/n (2.4GHz)
- Max Wireless Data Rate: 300Mbps
- Operating Frequency: 2.4 GHz
- Antenna Gain: 1.5 dBi
- Power Input: 5V microUSB (adapter included)
- Power Consumption: 3.5W
- Operating System: RouterOS Level 4
- Model Number: RB951Ui-2HnD
- CPU: Atheros AR9344, 600 MHz
- RAM: 128 MB
- Ethernet Ports: 5x 10/100 Fast Ethernet
- Wireless Standards: 802.11b/g/n (2.4GHz)
- Max Wireless Data Rate: 300 Mbps
- Antenna Gain: 2x 2.5 dBi (integrated)
- USB Port: Yes, USB 2.0
- PoE Output: Passive PoE on port 5 (up to 500mA)
- Power Input: 8-30V passive PoE or included 24V adapter
- Power Consumption: Max 7W
- Operating System: RouterOS Level 4
MSI GeForce RTX 3060 VENTUS 2X 12 GB OC (model 912V397‑039) delivers robust mid-range gaming performance, leveraging NVIDIA’s Ampere RTX 3060 chip with 3,584 CUDA cores and a boosted 1,807 MHz clock (often auto-boosting close to 2,000 MHz) alongside 12 GB of GDDR6 memory on a 192‑bit bus (~360 GB/s bandwidth), making it ideal for high-quality 1080p–1440p gaming with ray tracing and DLSS capabilities.
Its compact dual-fan TORX Fan 3.0 cooler with Zero Frozr provides solid thermal management—temps typically hover between 70–80 °C under load, though they can hit mid-80s in less ventilated setups—and remains quiet at low temps, though users note the fans can get loud under load. Drawing around 170 W from a single 8‑pin PCIe connector (PSU ≥ 550 W recommended), the card supports DX12 Ultimate, OpenGL 4.6, 4K@120 Hz output (via 3× DisplayPort 1.4a + 1× HDMI 2.1), and comes pre-installed with MSI software like Afterburner, Dragon/Mission Center, and Predator for OC tuning and system monitoring . Overall, the Ventus 2X is a dependable, cost-effective RTX 3060 variant—delivering strong gaming performance and ray tracing at a reasonable price, especially with proper case airflow and optional undervolting to improve thermals and acoustics.
Add to cart
MSI GeForce RTX 4060 VENTUS 2X 8 GB OC (912‑V516‑004) is a compact, budget-savvy graphics card built with NVIDIA’s Ada Lovelace architecture featuring 3,072 CUDA cores and a dual-mode boost clock that reaches up to 2,505 MHz in Extreme Performance mode via MSI Center (2,490 MHz by default), supported by 8 GB of GDDR6 memory at 17 Gbps on a 128-bit bus (~272 GB/s), making it a potent performer for high-quality 1080p gaming and capable of light 1440p play when using DLSS 3 frame generation.
Its 115 W TBP, powered by a single 8‑pin connector on PCIe 4.0 x8, allows multi-monitor HDR output including 4K@120 Hz and 8K@60 Hz, while its dual TORX Fan 4.0 cooler with heatpipes and Zero Frozr offers efficient cooling (typically 60–70°C under load) though with moderate fan noise (~36 dBA at ~2,400 RPM) . Reviewers highlight solid 1080p performance—pegged ~17% ahead of the RTX 3060 and ~9% ahead of AMD’s RX 7600—with power efficiency and DLSS 3 being key strengths, but the 8 GB VRAM may limit future AAA titles at higher settings and the cooler can get louder under stress. Ideal for compact builds with good airflow, this Ventus 2X variant offers no-frills, efficient gaming at a reasonable price, though users seeking better future-proofing or quieter operation may prefer variants with more VRAM or premium cooling.
Add to cart
MSI GeForce RTX 5060 Ti 16 GB GAMING TRIO OC (912V532‑030) is a high-performance mid-range GPU based on NVIDIA’s Blackwell architecture, featuring 4,608 CUDA cores and a factory boost clock of 2,647 MHz (up to 2,662 MHz in MSI Center’s Extreme Performance mode), paired with 16 GB of ultra-fast GDDR7 memory at 28 Gbps (128‑bit, ~448 GB/s). Equipped with a robust TRI FROZR 4 triple-fan cooler, nickel-plated copper baseplate, and reinforced backplate, it maintains impressive thermals (~70 °C peak) even under heavy loads and overclocking—where some users achieved a 10% fps uplift in 1080p/1440p benchmarks and pushed core speeds beyond 3,100 MHz with headroom for further tuning.
It delivers roughly 20% better rasterized gaming performance over the RTX 4060 Ti and slots close to the RTX 4070 in synthetic tests (3DMark Steel Nomad and Time Spy), while offering strong ray-tracing and DLSS 4 frame-generation capabilities; however, its $550 MSRP puts it near RTX 5070 territory With a 180 W TDP powered by a 16‑pin connector and PCIe 5.0 x16 interface, and support for up to 8K@60 or ultra-high refresh 4K displays via 3× DP 2.1b + 1× HDMI 2.1b, it’s ideal for 1440p enthusiasts and creative users—just be prepared for a premium price and ensure your PSU and airflow are up to the task.
Add to cart
MSI GeForce RTX 5060 Ti 16 GB VANGUARD SOC OC (912V532/535‑026) is an overclocked powerhouse built on NVIDIA’s Blackwell architecture with 4,608 CUDA cores and boost clocks between ~2,692–2,707 MHz via MSI Center, paired with 16 GB of GDDR7 VRAM at 28 Gbps (~448 GB/s). Its robust TRI FROZR thermal design—featuring a vapor chamber, StormForce triple-fan cooling, and reinforced backplate—maintains low temperatures and quiet operation even under load, supported by PCIe 5.0 x8 and a single 16‑pin power connector drawing around 180 W (MSI recommends a 600 W PSU). The Vanguard SOC excels at 1440p and entry-level 4K gaming with ray tracing and DLSS 4, and includes dual BIOS and MSI Center support for performance/acoustic tuning.
Enthusiasts have confirmed impressive overclocking headroom—+400 MHz core and +1,200–1,500 MHz memory boosts are stable, frequently reaching ~3.1 GHz core with only ~63 °C temperatures—delivering up to ~10% extra performance. With cutting-edge features like AV1 encoding/decoding, Reflex 2, and high-resolution display support (3×DP 2.1b + HDMI 2.1b), it’s well-suited for gamers and creators seeking a next-gen, high-performance card—provided your case and PSU can accommodate its ~337 × 140 × 61 mm size and 2 kg weight.
Add to cart
MSI GeForce RTX 5060 Ti 16 GB VENTUS 2X PLUS (912V535‑048) is a powerful mid-range GPU based on NVIDIA’s Blackwell architecture, packing 4,608 CUDA cores and a factory boost clock around 2,602–2,617 MHz, alongside a generous 16 GB of high-speed GDDR7 memory at 28 Gbps (128-bit, ~448 GB/s)—a solid foundation for 1440p and even some 4K gaming with ray tracing enabled and DLSS 4 frame generation. With a 180 W TDP fed via a single 8‑pin PCIe connector (PCIe 5.0 x8), and outputs including 3×DP 2.1a and 1×HDMI 2.1b supporting up to 8K@60 or 4K@480 Hz, it effortlessly drives multi-monitor setups.
Benchmarks show it outperforms the RTX 4060 Ti by about 15–24% and delivers a ~23% uplift over the 3060 Ti, with excellent thermal efficiency—peaking around 64 °C under load on the MSI Ventus cooler—though its compact dual‑fan design can get noticeably loud during intense gaming sessions. Sleek and compact for small builds, and offering a strong feature set (DLSS 4, RT/Tensor cores, Reflex 2, etc.), the Ventus 2X Plus delivers high-end performance and next-gen tech in a clean, no-frills package—just be prepared for potentially louder fans at load and ensure good case airflow.
Add to cart